Richard-Wagner-Straße 13D-55435 Gau-AlgesheimFon: +49 67 25 - 30 89-0
Reducer for gasoline tank
Deleting from blank to finished product bent and galvanized.
Tube with hexagon
Swaging to a diameter reduction of the hexagon swaging.
Dipstick guide tube
Beading and diameter reduction produced by rotary swaging, length limit upset
Conical tube for medical
Produced by rotary swaging conical tube
Round knitting needle-sharp
Rotary swaging of rejuvenation and peak.
By swaging moulded ball.
read more ...
You can reach us on weekdays from 08:00 to 16:00 o'clock.
Phone: +49 67 25 - 30 89-0
Fax: +49 67 25 - 30 89-20
send an email
The chipless reduction of the cross section along the corresponding material forming has a positive effect upon the grain flow of the metal.
Rotary swaging does not require any specific surface treatment like phosphating, soaping etc.
Rotary swaging machines can form both steel and non-ferrous material by hot or cold working methods. There are no temperature limitations.
Generally dies are changed within five minutes per station. Hydraulic feeds additinal movements are continuously variable and can be optimised for...
Depending on the shape of the workpiece, a pass-through method is used (load from front - unload from rear), or in the case of single ended cross...
Unlike most other shaping methods, workpieces do not require a layer of lubricant medium. The coolant, if necessary, is located in a closed cycle.
Contrary to chipping production, the material is transformed. This means considerably better use of materials. Costs for collecting, handling and...
The external and internal shapes are finished in a single step if the workpiece is formed over a mandrel. Non-round internal forms, for example...
Rotary swaging improves the surface finish (roughness) and tensile strength and ensures close tolerances. This will substantially improve the physical...
METALLTECHNIK MENGES GmbH | Richard-Wagner-Straße 13 | D-55435 Gau-Algesheim | Phone: +49 67 25 - 30 89-0
GTC | Imprint | Privacy